Huvema HU 285 AC-4 TOPLINE, Manual

Page: 8 / 24

8
CHANGES AND T YPING ERRORS RESERVED CHANGES AND T YPING ERRORS RESERVED
5.5 Sq.Ln. (35Cm2) / 4” (100mm) distance
=1.38(35Mm) average width
1.38” (35Mm), use a 4/6 vari-tooth
Note
: the band speed and cutting rate recommendations presented on this chart are approximations
and are to be used as a starting point for most applications. For exact sawing parameters’ consult your
saw blade supplier.
6.
B
i
-
metal speeds and feeds
These figures are a guide to cutting 4”(100mm) material (with a 314 Vari-Tooth) when using a cutting fluid.
Increase Band Speed:
15% When cutting 1/4”(6.4mm) material (l0/l4 Vari-Tooth)
12% When cutting 3/4”(19 mm) material (6/10 Vari-Tooth)
10% When cutting 1-1/4”(32 mm) material(5/8 Vari-Tooth)
5% When cutting 2-1/2” (64 mm) material(4/6 Vari-Tooth)
Decrease Band Speed:
12% When cutting 8”(200mm) material(2/3 Vari-Tooth)
MATERIAL
ALLOY
ASTM NO.
BAND SPEED
FT./MIN M/MIN
Copper
Alloy
173,932 314 96
330,365 284 87
623,624 264 81
230,260,272 244 74
280,264,632,655 244 74
101,102,110,122,172 234 71
1751,182,220,510 234 71
625,706,715,934 234 71
630 229 70
811 214 65
Carbon
Steel
1117 339 103
1137 289 88
1141,1144 279 85
1141 HI STRESS 279 85
1030 329 100