Huvema HU 16 SUPER, Manual

Page: 15 / 16

15
CHANGES AND T YPING ERRORS RESERVED CHANGES AND T YPING ERRORS RESERVED CHANGES AND T YPING ERRORS RESERVED
Our products are frequently updated and improved. Minor changes may not yet be incorporated in this manual.
Always state the year of build, type and serial number of the machine in correspondence.
Manufacturer and importer assume no responsibility for defects which result from not reading the manual carefully
or wrong use of the machine. No rights can be derived from this manual.
All rights reserved. No part of this booklet may be reproduced in any form, by print, photoprint, microfilm or any
other means without written permission from the publisher.
© Huberts bv, Kennedylaan 14, Veghel, the Netherlands. Internet: www.huvema.nl
CE DECLARATION OF CONFORMITY
(in accordance with supplement II, section 1A of the Machinery Directive)
Industrie & Handelsonderneming Huberts bv, Kennedylaan 14, 5466 AA Veghel, the Netherlands,
in the capacity of importer, is to be held responsible for declaring that the Huvema machine:
Drilling machine HU 16 Super
which this declaration relates to, is conform the following norms:
NEN-EN-ISO 12100:2010, NEN-EN-IEC 60204-1:2006/C11:2010, NEN-EN-IEC 61000-6-1:2007,
NEN-EN-IEC 61000-6-3:2007/A1:2011/C11:2012, NEN-EN 12717:2001+A1:2009
and meets the basic requirement of the:
• Machinery Directive: 2006/42/EC
• Low Voltage Directive: 2006/95/EC
• EMC Directive: 2004/108/EC
Veghel, the Netherlands, June 2014
L. Verberkt
Managing director