Huvema HU 13 profi, Manual

Page: 23 / 44

-22-
No. Description Art.no. No. Description Art.no.
18 Retainer ring 63 Washer
19 Quill 64 Bar (rubber)
20 Key 65 V-belt guard cover
21 Key (drift) 66 Screw
22 Drill chuck guard 500250 67 Motor pulley 500801
23 Quick-acting drill chuck 11302 68 Micro switch v-belt cover 501076
24 Arbor 69 House of micro switch
25 Spindle 500985 70 Screw
26 Ball bearing 71 Hex. nut
27 Screw 72 Screw
28 Switch 73 Knob of v-belt guard cover
29 Pan head screw 74 Screw
30 Pan head screw 75 Clamp cord (2 pcs.)
31 Lock washer 76 V-belt 504055
32 Indicator 77 Pulley nut
33 Pin stop 78 Spindle pulley 500822
34 Ring for depth stop 79 Insert shaft of pulley
35 Shaft (pinion) 501009 80 Ball bearing
36 Hub 81 Spacer
37 Hex. socket set screw 82 Retainer ring
38 Wing bolts for depth stop/v-belt
tension 83 Hex. L wrench 3 mm
39 Pin 84 Hex. L wrench 4 mm
40 Rod of feed handle (3 pcs.) Upper part of spindle complete
(79+80+81+82) 500268
41 Knob of feed handle (3 pcs.) Handles complete (3x40 + 3x41) 500456
42 Pin of motor support (2 pcs.) Column complete (2+3+4) 500556
43 Washer Spindle complete
(16+17+18+19+20+24+25+26)
500949
44 Motor support Capacitator 10uF 450V 500320
45 Lock ring Capacitator 10uF 250V 500321
Our products are frequently updated and improved. Minor changes may not yet be incorporated in this manual. Always state the year of
build, type and serial number of the machine in correspondence.
Manufacturer and importer assume no responsibility for defects which result from not reading the manual carefully or wrong use of the
machine. No rights can be derived from this manual.
All rights reserved. No part of this booklet may be reproduced in any form, by print, photoprint, microfilm or any other means without
written permission from the publisher.
© 2002, Huberts bv, Kennedylaan 14, Veghel, the Netherlands.
Internet: www.huvema.nl