Huvema HU 13-2 N, Manual

Page: 4 / 12

4
CHANGES AND T YPING ERRORS RESERVED
Always wear safety glasses.
2. A
PPLICATIONS
This drill press is intended for drilling holes in ferrous and non-ferrous metals and woods. The machine has a light and
handy design and can be easily operated. The HU 13 laserdrill is widely used in machine works and repair shops.
3. M
AIN SPECIFICATIONS
Motor power 0,4 kW T-slots 2
Drive
V
Column diameter
60 mm
Drilling capacity
13 mm
Distance spindle-column
125 mm
Drilling depth 60 mm Table dimensions l x w 196 x 195 mm
Spindle taper MT2 Base dimensions l x w 348 x 215 mm
Number of speeds
5
Packaging dimensions l x w x h
690 x 430 x 260 mm
Spindle speed range
500 - 2500 rpm
Net weight
30 kg
Voltage 230 V
Subject to change.
4. R
ANGE OF SPINDLE SPEEDS
Motor
speed
Spindle speeds (min-1)
1400 min-1 500 890 1400 1900 2500
5. U
NPACKING AND CHECKING CONTENTS
Separate all loose parts from the packaging materials and check each item according to the following table:
If any parts are missing, please contact the seller. Do not attempt to operate until the missing parts are available.
Remove the protective oil that is applied to the table and column. Use any ordinary household type grease and spot
remover. Apply a coat of paste wax to the table and column to prevent rust. Wipe all parts thoroughly with clean dry
cloth.
1. Head assembly (with belt K-26) 1
2. Column support assembly 1
3. Bag of loose parts 1
4. Base 1
5. Table support assembly 1
6. Feed handle 1
7. Chuck 1
8. Owner’s manual 1
List of loose parts in bag:
1. Wrench hex “L” 4 mm 1
2. Wrench hex “L” 6 mm 1
3. Support lock handle 1
4. Screw hex head M8x20 3
5. Depth stop ring 1
6. Hexagon socket head cap screws M8x25 1
If any parts are missing, please contact the seller. Do not attempt to operate until the missing parts are available.