3 / 6
Information & Safety Warnings
Protect your User Codes and Master Code.
Restrict access to your lock’s interior assembly and routinely check your settings to ensure they have not been altered
without your knowledge.
This lockset is designed to provide the highest standard of product quality and performance. Care should be taken to ensure
a long-lasting finish. When cleaning is required use a soft, damp cloth. Using lacquer thinner, caustic soaps, abrasive
cleaners or polishes could damage the coating and result in tarnishing.
IMPORTANT: Do not load batteries until lock is completely installed.
1
2
3
4
5
6
7
8
9
A.
1
2
3
4
5
6
7
8
9
B.
2
2
2
2
2
2
2
2
2
C.
3
8
6
5
D. If
Then
and
Forward number sequence
Backward number sequence
Repeat number sequence
3
8
1
9
6
5
1
9
3
8
6
5
Contain existing code sequence
1. Master Code( 4 to 10 digits) : The default Master Code is 12345678. It is required that you change it to a code of your
own before programming.
2. User Code(4 to 10 digits) : A total of 20 User Codes (and one temporary one-time User Code) may be programmed.
3. Both master and user pin codes don not support the following combination of numbers.
Programming Instructions
How To Use
UNLOCK the door with fingerprint ID
UNLOCK the door from outside
LOCK the door from outside
LOCK the door from inside
Master/ User
code
Touch and hold the
Sensor with your finger
to unlock the lock.
Auto Re-lock Mode
In Auto re-lock mode, the bolt will
extend out automatically in 30 seconds
after unlocking.
Manual Mode
Press any key on keypad for 2 seconds.
Auto Re-lock Mode
In Auto re-lock mode, the device
will be locked automatically.
UNLOCK the door from inside
Rotate the thumb turn to
Unlock position.
Manual Mode
Rotate the thumb turn to Lock position.