Hussmann Corporation • Bridgeton, Missouri 63044-2483 U.S.A.
S
tore
C
onneCt
SC-21
P/N 3148885_B
3
Risk of fire or electric shock. Only qualified
service technicians shoould install or service
this equipment. If not qualified, do not
attempt installation.
REVISION HISTORY
REVISION B
1. . . . . . . . . . . . . . . . . . .
Added warranty information
REVISION A
1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Original issue.
IMPORTANT!
All operations must be carried out by qualified personnel.
Make electrical connections as short as possible, and do not wind them around electrically connected
parts. Make sure the power meters are switched off before the working on electrical connections. Follow
electrical connection instructions carefully when connecting loads.
Electrostatic Discharge (ESD)
Hussmann recommends industry workers use antistatic wrist straps, wrist strap, or ground bracelets
when working on electronic devices, which can be damaged by electrostatic discharge.
To avoid causing static discharge, do not touch the electronic components on the boards.
The SC-21 includes an LTE Modem which: Contains FCC ID: XPYTOBYL201
Contains
IC:
8595A-TOBYL201
FCC Declaration of Conformity
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference re-
ceived, including interference that may cause undesired operation.
Radiofrequency radiation exposure Information: this equipment complies with radiation exposure limits
prescribed for an uncontrolled environment for fixed and mobile use conditions. This equipment should
be installed and operated with a minimum distance of 20cm between the radiator and the body of the
user or nearby persons. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter except as authorized in the certification of the product.
The gain of the system antenna(s) used for TOBY-L201, MPCI-L201 modules (i.e. the combined trans-
mission line, connector, cable losses and radiating element gain) must not exceed 9.8 dBi (700 MHz, i.e.
LTE FDD-17 band), 10.2 dBi (750 MHz, i.e. LTE FDD-13 band), 10.0 dBi (850 MHz, i.e. UMTS FDD-5
or LTE FDD-5 band), 6.8 dBi (1700 MHz, i.e. AWS or LTE FDD-4 band), 8.5dBi (1900MHz, i.e. UMTS
FDD-2 or LTE FDD-2 band) for mobile and fixed or mobile operating configurations.
