16
Installation (cont’d)
3. Set second case within one foot (1’) of the first
case. Keep the supports along the length of the
case and far end of case. Level case to the first
using the instructions in step one.
4. Apply liberal bead of case joint sealant (butyl)
to first case. Sealant area is shown using a
dotted line in illustration. Apply heavy amount to
cover entire shaded area.
It is the contractor’s responsibility to install
case(s) according to local construction and
health codes.
ATTENTION
INSTALLER
5. Apply liberal bead of case joint sealant
(butyl) to first case. Sealant area is shown
using a striped line in illustration in page 14.
Apply heavy amount to cover entire shaded
area.
6. Slide second case up to first case snugly.
Then level second case to the first case so
glass front, bumper and top are flush.
Do not use bolts to pull cases together.
