background image

 

DISPLAY  PANS 

   
The NIM-6 is provided with 3 display pans which you should make sure are placed correctly and never operate 
the cabinet without these. If you use the case without these display pans the interior airflow and temperature in 
the cabinet will be adversely affected 
   

AIR DISTRIBUTION  

The NIM-6 and NIM-4 cabinets are sensitive to air disturbances.  Air currents passing around cabinets will 
seriously impair their operation.  DO NOT allow air conditioning, electric fans, open doors or windows, etc. to 
create air currents around the cabinets.  
  

LOAD LIMITS 

Each merchandiser has a load limit decal.  Shelf life of perishables will be short if load limit is violated.  

Overstocking will adversely affect product temperature and cabinet efficiency

.   

   

ELECTRIC CONNECTIONS   

 
It is very important for your safety and that of your customers that this cabinet be grounded.  A qualified 
electrician must make the electrical installation, in accordance with the national or local electric codes.   
   
NOTE: Connecting this cabinet to any electric supply other than specified on the serial plate, will void the 
warranty and it can cause severe damage to the unit.   
   

WARNING 

Always disconnect the electrical power at the main disconnect when servicing or replacing any electrical 
component.  This includes, but is not limited to, such items as fans, heaters, thermostats and lights.   
   
   
   
 
 
  

           

 

                 
    
 
 
 
 
 

   

HONEY 
COMB 
DISCHARGE 

PAN 
DISPLAY

TEMPERATURE
CONTROL

DOORS GLASS 
TEMPERED

Summary of Contents for NIM









Reviews: