1-6
I
NSTALLATION
P/N 0378414G
Seal Merchandisers
1. Apply butyl tape across the bottom joint. Be
sure to extend the tape up the back and front
of the case.
2. Use field-supplied silicone to fill any gaps
between the front support brackets.
SPLASHGUARD BRACKET
AND JOINT SUPPORT
Install Splashguard Bracket
Position splashguard brackets to the merchandiser
and level to the floor. Each bracket has a 1
1
/
2
in.
(38 mm) slot at the rear of the bracket where it
attaches to the merchandiser. Tighten screws to
secure the brackets.
Install Splashguard Joint Support
Position the joint support across the brackets as
shown above. Fasten with hex head sheet metal
screws.
Butyl Tape
Front
Detail
Silicone
Field Supplied
Bracket
Base of Case
Joint Support
Screw
