Rev. 0010
15
6. VERTICAL AND FRONT TO BACK ADJUSTMENT
AND OPENING OVERLAP PROBLEMS
• V
ERTICAL
A
DJUSTMENT
1. Remove
2. Lift open
3. Loosen hex screw
4. Add or remove
5. Close glass panel(s)
top glass
glass panel(s)
(1/4" allen).
shims as needed.
and check alignment
and panel
and relieve
Remove chrome
(see note on shims
Retighten hex screw
enclosing
tension on
access plate in order
below)
and reinstall removed
mini-top
hinge.
to hold nut plate.
components.
hardware.
• F
RONT–
B
ACK
A
DJUSTMENT
1. Remove
2. Estimate
3. Lift open
4. Loosen hex screw
5. Slide the mini-top
top glass
amount of
glass panel(s)
(1/4" allen) slightly.
forward or backward
and panel
adjustment
and relieve
Remove chrome
to the mark in step 2.
enclosing
and make
tension on
access plate in order
Check alignment of
mini-top
pencil mark
hinge.
to hold nut plate.
glass.
hardware.
on the
Retighten components.
Back
of Case
Inside
of Case
Chrome cap
for access to
nut plate
nut
plate
CUT VIEW:
Mini Top
Hardware
NOTE: Standard shim thickness is 1/16"