Leveler Adjustment
Position the first case at the highest point.
Set a long level (4 ft [1220 mm] or more)
on the upper front panel of the case. Use an
open-end wrench to turn leg levelers until
the case is level from end to end and from
front to back. Check all 6 legs on 8 ft (2438
mm) cases, or 8 legs on 12 ft (3658 mm)
cases.
Note:
To avoid removing concrete flooring,
begin lineup leveling from the highest point
of the store floor.
Attention to glass position is critical
during the leveling process.
Adjusting leg levelers will affect the
position of the glass. Make certain that the
glass is square with the case, and does not
interfere with other glass or case ends.
If the glass is still out of alignment, refer to
the following
Front Glass Positioning
instructions.
1-4
I
NSTALLATION
P/N 0453549
M
INIMUM
H
EIGHT
M
AXIMUM
H
EIGHT
Adjustable
Leg Leveler
Lower
Raise
Level on
Upper Front
Panel
U
CAUTION
!
Leg
Leveler
Glass
Glass
Movement
Glass must be
properly supported
when adjusting.
