7
Shipping Braces
(Note to all Merchandisers)
Move the fi xture as close as possible to its permanent
location and then remove all packaging. Check for damage
before discarding packaging. Remove all separately
packed accessories such as kits and shelves.
Do NOT remove shipping braces until the
merchandisers are properly anchored to the floor.
Merchandisers are top heavy and could tip over
causing serious injury. Merchandisers must
be braced before removing the lag bolts.
Bag Rack Shipping Brace
On non-refrigerated cases, the shipping braces in the
middle should be removed. Its purpose is to protect the
bag rack during shipment.
Leveling
Merchandisers must be installed level to ensure proper
operation of the refrigeration system and to ensure proper
drainage of defrost water. Place prybar under metal base
and lift. DO NOT LIFT END PANEL. Turn leveler, with
supplied wrench, (one wrench per order) clockwise to
raise, counter clockwise to lower. Repeat process with
other levelers until case is level.
NOTE:
To avoid removing concrete fl ooring, begin lineup
leveling from the highest point of the store.
Joining
Merchandisers are of sectional construction which means
that two or more may be joined in line yielding one long
continuous display requiring only one pair of ends. Joint
kits and instructions are shipped separately.
Exterior Loading
Do
NOT
walk on top of merchandiser or damage to the
merchandiser and serious personal injury could occur.
They
are not structurally designed to support excessive
external loading such
as the weight of a person.
