PRODUCT INSTALLATION MANUAL
DO13 SELF SERVE OLIVE
_________________________________________________________________________________________________________________________
Page 26
Hussmann
Appendix 5 Risk analysis
HAZARD
CONTROL MEASURES
Electrical -
Replacement of electrical components
Request a service call. Electrically isolate cases before works
Ergonomic -
Moving/ positioning/ adjusting cases
Staff must be trained in the correct procedures for setting up cases
and ergonomic practices. PPE must be worn
Falling -
Connecting sensor probe wiring during
installation
Use of barriers & fall arrest systems as appropriate & in accordance
with State & Territory Legislation. Safe working at heights
Entanglement -
Contact with fans when cleaning
Electrically isolate cases before work is carried out. Staff training,
Cuts and stabbing -
Potential for cuts from broken fluorescent
tube or during tube replacement
Electrically isolate cases. Staff not to replace tubes. Call service
provider. PPE must be worn.
Electrical -
Potential for electric shock when cleaning
electrical fittings and components
Electrically isolate cases before work is carried out. Staff training,
RCD. Keep electrical connections dry at all times.
Falling -
Climbing on shelves
Staff must be trained in OH&S procedures. MUST not climb on
shelves or cases.
Crushing -
Hands or fingers may become pinched or
crushed during the positioning of base trays,
shelves & stock
Staff must be trained in the correct procedures for setting up
cases and ergonomic practices
Slipping -
Drain may leak or become blocked causing
water spillage
Visual Inspection and regular maintenance. Request service call
when necessary.
Cuts and stabbing -
Potential for cuts caused by damaged or
missing parts
Visual Inspection and regular maintenance. Request service call
when necessary. PPE must be worn when handling broken or
damaged parts.
Ergonomic -
Stretching during the cleaning of the case
and positioning of stock and shelves leading
to strains and sprains
Staff must be trained in the correct procedures for cleaning cases &
ergonomic practices. Cleaning tools which reduce the need for
stretching should be used.
Slipping -
Surfaces may become slippery due to
spillage from the case during operation or
cleaning
Visual Inspection. Appropriate remedial action.
Cuts and stabbing -
Potential for cuts caused by sharp edges &
evaporator coil during cleaning
PPE must be worn by staff
Cuts and stabbing -
Cleaning cold glass surfaces with hot water
Staff must be trained in the correct procedures for cleaning cases
and ergonomic practices
Crushing -
fingers, hands or body between doors
Operators to always open and close doors using handles provided,
ensuring the area is clear of other persons.
Electrical -
electrical connections in cases
Electrically isolate cases before work begins. Must be carried out by
a service provider. Staff training.
Table (3) Risk analysis
