.
Install gasket on retainer and insert in opening.
Putting downward pressure on gasket-retainer. Reinstall phillips head screws
Stretch gasket downward and install gasket bottom flange over retainer flange.
HOW TO REPLACE HEATERS –
Disconnect power to cabinet, remove collar as shown.
Lift off collar and retainer, being careful not to put stress on the heater connections.
Remove old heater from slot and carefully remove leads from cavity and disconnect.
Remove old heater from slot with leads aligned with connector cavity.
Connect heater leads and push excess leads into cavity. Avoid bending of heater and
connections other than required for installation. Replace retainer and collar on
cabinet.
Install screws through retainer into cabinet.
Pull rubber collar down over bottom edge of collar retainer, being certain retainer is in
collar groove.
Re-connect cabinet power.
SEE THE DIAGRAMS ON THE FOLLOWING PAGE FOR MORE REFERENCE
9
Summary of Contents for 10HD
Page 10: ......
