Husqvarna ZTH, Operator'S Manual

Page: 39 / 60

English-
37
LUBRICATION
5. Front Wheel Mount
Lubricate with a grease gun, 1 nipple for each
wheel mount, until the grease is forced out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
6. Front Wheel Bearings
Lubricate with a grease gun, 1 nipple for each set
of wheel bearings, until the grease is forced out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
7. Belt Adjuster, Mower Deck
Remove the foot plate (two screws) and
lubricate with a grease gun, 1 nipple, until
grease is forced out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
8. Mower Deck Height Adjuster
Lubricate using a grease gun, 1 nipple,
until the grease squeezes out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
8011-573
Lubricating the front wheels
8011-576
The belt adjuster grease nipple
IMPORTANT INFORMATION
Be spartan and remove excess lubricant so
that is does not come into contact with
belts or belt pulley drive surfaces.
8011-574
Lubricating the cutting height adjuster