SERVICE AND ADJUSTMENTS
22
TO REPLACE FUSE
Replace with 30 amp automotive-type plug-in fuse. The
fuse holder is located in the engine compartment, directly
in front of the dash.
TO REPLACE HEADLIGHT BULB
•
Raise hood.
•
Pull bulb holder out of the hole in the backside of the
grill.
•
Replace bulb in holder and push bulb holder securely
back into the hole in the backside of the grill.
•
Close hood.
INTERLOCKS AND RELAYS
Loose or damaged wiring may cause your tractor to run
poorly, stop running or prevent it from starting.
•
Check wiring. See the electrical wiring diagram in the
Repair Parts section of this manual.
TO REMOVE HOOD AND GRILL ASSEMBLY
(See Fig. 30)
•
Lift hood. Disconnect headlight wire connection.
•
Remove wing nuts on inside of side panels.
•
Pivot hood and side panel forward and lift off tractor.
•
To replace, reverse above procedure.
WINGNUT (INSIDE)
WIRE CONNECTION
FIG. 30
