TROUBLESHOOTING 22
227
Faults
Possible cause
Action
Engine overheats
Foam formation in cooling sys-
tem
–
Drain the coolant.
–
Fill/bleed the cooling system.
(
Thermostat defective
–
Check the thermostat.
Fuse
5
blown
–
Change the fuses of individual power
consumers. (
Defect in radiator fan system
–
Check the radiator fan system.
Malfunction indicator lamp
lights up yellow
Fault in fuel injection system
–
Read out the fault memory using the
Husqvarna Motorcycles diagnostics
tool.
Engine dies during the trip
Lack of fuel
–
Refuel. (
Fuse
1
,
3
,
4
, or
7
is blown
–
Change the fuses of individual power
consumers. (
ABS warning lamp lights up
ABS fuse is blown
–
Change the ABS fuses. (
Large difference in wheel
speeds of the front and rear
wheels
–
Stop the vehicle, switch off the igni-
tion, and start it again.
Malfunction in ABS
–
Read out the ABS fault memory using
the Husqvarna Motorcycles diagnos-
tics tool.
High oil consumption
Engine vent hose bent
–
Route the vent hose without bends or
change it if necessary.
Summary of Contents for Vitpilen 401 2018
