Husqvarna TF338, Operator'S Manual

Page: 12 / 52

5 –
English
SAFETY INSTR UCTIONS
Maintenance
• Always stop the engine before repair, cleaning,
maintenance work or when changing the tools on the
machine.
• Regular maintenance is essential for safety and to
maintain the levels of performance.
• Wear heavy-duty gloves when changing the tools on the
machine.
• Replace the rotating blade in complete sets to keep them
balanced. Always use genuine parts.
• Check that nuts and screws are tight.
• Never use a machine that has a faulty muffler. Contact an
authorised service workshop.
T ransport and storage
• Allow the machine to cool before putting it in storage.
• Store the machine and fuel in such a way that there is no
risk that leaking fuel or fumes can cause any damage.
• The machine should always be stored in a dry place away
from open fire, sparks or intense heat.
• Fuel and fuel vapour are highly flammable. Take care
when handling fuel and oil. Bear in mind the risk of fire,
explosion and inhaling fumes.
• When storing and transporting fuel always use approved
containers intended for this purpose.
• Do not try to lift the machine. Use a method of handling
adapted to the weight of the machine and to the situation.
• Take extra care when loading it onto or off a vehicle or
trailer. Use a suitable ramp.
• Use an approved trailer to transport the machine. Secure
the machine with approved tightening straps. Ensure that
no part of the machine are squashed or damaged by the
tightening straps. It is a good idea to cover the machine.
• For more information about moving of the machine during
work, see section "Moving".
Fueling
• Always stop the engine and let it cool for a few minutes
before refuelling.
• Refuel in a well ventilated area with the engine turned off.
• Bear in mind the risk of fire, explosion and inhaling
fumes.Do not fill so that the fuel runs over. Wipe up all
spillage on the ground and machine. If you spill fuel on
yourself or your clothes. Change your clothes. Move the
machine at least 3 metres away from the refuelling area
before starting.
• The engine emits carbon monoxide, which is a colourless,
poisonous gas. Do not use the machine in enclosed
spaces.
IMPORTANT! For your own safety, do not alter the
characteristics of the machine. Do not change the engine
speed settings and do not run the engine at excess speed.
!
W ARNING! Petrol is highly inflammable.
Exercise care and refuel outdoors. Fire,
open flame and smoking are prohibited.
Clean the area around the fuel cap. Tighten
the fuel cap carefully after refuelling. If the
cap is not properly tightened the cap might
vibrate lose and fuel may escape from the
fuel tank creating a fire hazard. Move the
machine at least 3 m from the refuelling
point before starting it.