Husqvarna TC 85, Owner'S Manual, Page: 87 / 131

13 WHEELS, TIRES
85
H00935-10
Main work
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the front wheel bearing.
–
Clean and grease shaft seal rings 1 and contact surface A
of the spacers.
Long-life grease ( p. 123)
–
Insert the spacers.
A00152-11
–
Clean and grease the wheel spindle.
Long-life grease ( p. 123)
–
Position the front wheel.
The brake linings are correctly positioned.
–
Insert the wheel spindle.
–
Mount and tighten screw
2
.
Guideline
Screw, front wheel
spindle M20x1.5 35 Nm (25.8 lbf ft)
–
Operate the hand brake lever several times until the brake
linings are seated correctly against the brake disc.
–
Remove the motorcycle from the lift stand. ( p. 45)
–
Operate the front brake and compress the fork a few times
firmly.
The fork legs straighten.
–
Tighten screws 3 .
Guideline
Screw, fork stub M8 15 Nm (11.1 lbf ft)
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 45)
13.3 Removing the rear wheel
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 45)