11 SERVICE WORK ON THE CHASSIS
47
A00144-11
–
Loosen screws
3
. Remove the left fork leg.
–
Loosen screws
4
. Remove the right fork leg.
11.6
Installing the fork legs
H02312-11
Main work
–
Position the fork legs.
Air release screw
1
of the right fork leg is positioned to
the front.
Valve
A
of the left fork leg faces the front.
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
must be flush with the upper edge of the upper triple
clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
A00144-10
–
Tighten screws
2
.
Guideline
Screw, top triple
clamp
M8
20 Nm (14.8 lbf ft)
–
Tighten screws
3
.
Guideline
Screw, bottom triple
clamp
M8
15 Nm (11.1 lbf ft)
A00143-10
–
Position the brake caliper with spacers and fit and tighten
screws
4
.
Guideline
Screw, front
brake caliper
M8
25 Nm (18.4 lbf ft)
Loctite
®
243™
–
Position the brake line and clamp. Mount and tighten
screws
5
.
Finishing work
–
Install the front wheel.
–
Remove the motorcycle from the lift stand. (
Summary of Contents for TC 85
Page 1: ...OWNER S MANUAL 2018 TC 85 Art no 3402163en ...
Page 2: ......
