10
– English
USE
Error and information messages
This table will help you to easily interpret the Solar Mower’s signals. When the panel is opened and the alarm has been switched off
the LEDs on the keyboard will come on for 12 seconds. A green LED indicates an information message and a red LED an error
message. To see the latest error message again, enter
*
20 #
.
LED
LED 1 flashes
LED 2 on
LED 2 flashes
LED 3 on
LED 3 flashes
Sound
2 beeps
every ten
seconds
1 beep
every sixty
seconds
2 beeps
every ten
seconds
3 beeps
per second
3 beeps
per second
LED
LED 4 on
LED 4 flashes
LED 5 on
LED 6 on
LED 6 flashes
Meaning
Charging in progress.
When charging is complete
the Solar Mower starts to
work again.
Night mode.
Solar Mower has mown for
the set time. It will start
mowing again next day.
No code or has expired.
Enter the code again.
The Solar Mower has got
stuck.
Sound
3 beeps
per second
3 beeps
per second
3 beeps
per second
3 beeps
per second
Long beep
Meaning
The cutting disk is blocked.
Switch off the power switch
and check that the cutting
disc rotates freely.
The Solar Mower is outside
the working area, or the
boundary wire is connected
incorrectly.
The wheel motors are
blocked or slip. Check that
nothing is blocking the drive
wheels.
The Solar Mower does not
sense the signal from the
wire.
Incorrect entry from the
keyboard.
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
If an error has occurred this is signalled until night falls, the Solar Mower then enters night mode. However, if you lift the panel
during the night the error code is displayed. The long beep after the panel has been lifted indicates that the cutting disc brake is on.
Summary of Contents for Solar Mower
Page 16: ...2002W02 H 6I 114 00 43 26 ...
