8
– English
USE
Start-up sequence
These instructions assume that the boundary wire and generator have been installed correctly. It is not necessary to charge the
battery for 60 minutes if the Solar Mower has been used recently.
Switch on the power switch
The beep indicates that the battery
has enough power to run the
electronics.
Charge 60 min in bright
daylight
Power switch in “STOP” position.
Solar Mower starts
Solar Mower still charging
LED 1 flashes (2 beeps/10 seconds).
The Solar Mower will start automatically
when it has recharged.
A short beep is heard and LED 1
comes on each time a key is pressed.
Enter code (
*
code #)
Code not accepted
A long beep is heard and LED 6 flashes.
Wrong code
A long beep is heard and LED 6 flashes.
The keyboard is now switched off. Wait 2
minutes before you try again. Contact
your dealer if you have lost your code.
Code accepted
A short beep is heard and LED 1
lights up on the keyboard. Fold down
the rear solar panel.
Summary of Contents for Solar Mower
Page 16: ...2002W02 H 6I 114 00 43 26 ...