![Husqvarna Soff-Cut 2500 Operator'S Manual Download Page 16](http://html.mh-extra.com/html/husqvarna/soff-cut-2500/soff-cut-2500_operators-manual_172939016.webp)
TECHNICAL SPECIFICATIONS
Engine
Model
Honda GX 390
Engine oil volume,
quarts/liters
1.2/1.1
Gasoline tank
volume, gal/liters
1.7/6.5
Type
cooled, 4-cycle, single slant cylinder,
overhead valves, gasoline engine
Air
fi
lter
Cyclonic type
Oil system
Oil alert with auto shut down sensor
Muf
fl
er
Silent type 100 dbA, exhaust de
fl
ector,
spark arrestor
Emissions
Complies with EPA Phase 2 and CARB
Tier II USA regulations
Cooling Air
cooled
Cylinder
Aluminum with cast iron liner
Controls
Engine mounted manual fuel shut off
lever Instrument panel mounted manual
choke, electric switch operated throttle,
keyed on/off switch.
Weight and Dimensions
Weight – dry, lbs/kg
336/152
Weight with gasoline and oil full, lbs/kg
348/158
Length (handle folded in), inch/mm
50/1270
Width, inch/mm
23/584
Height, inch/mm
38/965
Blade
Material cut
Green concrete only
Blade type
10.0” (254 mm) or 9.0” (229 mm) dry cut
with tri-arbor
CALIFORNIA AIR RESOURCES BOARD (CARB):
This machine is considered a preempt Off-Road Application as relating to CARB stan-
dards. Under construction equipment, and in particular, as a Saws : concrete, masonry, cutoff, with engine power less than 19KW (25hp),
CARB standards do not apply to this machine.
For more information see the website
http://www.arb.ca.gov/msprog/offroad/preempt.htm
EC DECLARATION OF CONFORMITY
Husqvarna AB
, SE-433 81 Göteborg, Sweden, tel: +46-31-949000, declares under sole responsibility that the
Husqvarna Soff-Cut 2500
dating from 2010 serial numbers and onwards (the year is clearly stated on the rating plate, followed by the serial number), complies with
the requirements of the COUNCILíS DIRECTIVE:
• of May 17, 2006 ”relating to machinery” 2006/42/EC
• of December 15, 2004 ”relating to electromagnetic compatibility” 2004/108/EC.
• of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
The following standards have been applied: EN ISO 12100:2003, EN 55014-1:2006, EN 55014-2/A1:2001, EN 61000-3-2:2006, EN 61000-
3-3/A1/A2:2005, EN 13862/A1:2009.
Huskvarna December 29, 2009
Henric Andersson
Vice President, Head of Power Cutters and Construction Equipment
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
TECHNICAL DATA
Blade rotation
Counter clockwise, upcutting
Blade shaft speed,
rpm
3200
Cutting depth
1 to 1 1/2 inch (25 to 38 mm) depending
on amount of blade wear
Cutting distance
from wall, inch/mm
3 1/2 / 89
Average cutting rate
- Estimate only. Speed will vary with job
conditions and concrete mixes.
Soft aggregates, ft/min / m/min
20/6.1
Medium aggregates, ft/min / m/min
14/4.3
Hard aggregates, ft/min / m/min
8/2.4
Blades are available in 10.0 inch (254 mm) and 9.0 inch (229 mm)
diameters and in 0.100 inch (2.5 mm), 0.250 inch (6.4 mm), 0.380
inch (9.7 mm), and 0.500 inch (12.7 mm) widths.
Noise emissions (see note 1)
Sound power level, measured dB(A)
109
Sound power level, guaranteed dB(A)
110
Sound levels (see note 2)
Sound pressure level at the operators ear, dB(A)
91
Vibration levels, a
hv
(see note 3)
Handle right, m/s
2
3,4
Handle left, m/s
2
3,6
Note 1: Noise emissions in the environment measured as sound
power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Noise pressure level according to EN 13862. Reported
data for noise pressure level has a typical statistical dispersion
(standard deviation) of 1.0 dB(A).
Note 3: Vibration level according to EN 13862. Reported data for
vibration level has a typical statistical dispersion (standard devia-
tion) of 1 m/s
2
.