Husqvarna RZ 3016, Operator'S Manual

Page: 20 / 36

Maintenance Schedule
The following is a list of maintenance procedures that must be
performed on the machine. For those points not described in
this manual, visit an authorized service workshop. An annual
service carried out by an authorized service workshop is recommended to maintain your machine in the best possible
condition and to ensure safe operation.
Read
Maintenance in the Safety section.
Maintenance
Daily
At least
once
each
year
Maintenance interval
in hours
Before After 25 50 100 300
Check the park brake
●
Check the engine’s oil level (every refueling)
■
Check the safety system
●
Check for fuel and oil leakages
♦
Check/clean the engine’s cooling air intake
■
Check the mower deck
●
Check for loose hardware (screws, nuts)
●
Clean under the mower deck
●
Start the engine and blades, listen for unusual sounds
♦
Check for damage
♦
Thoroughly clean around the engine
♦
Clean around belts, belt pulleys
♦
Check the tire pressures
●
Check battery
●
Sharpen/replace mower blades
●
Clean the engine’s cooling air intake
2)
■ ■
Clean the air cleaner’s foam pre-filter
2)
■ ■
Clean the air cleaner’s paper filter cartridge
2)
■ ■
Check/adjust the park brake
♦ ♦
Check/adjust throttle cable
●
Check the condition of belts, belt pulleys
● ●
Change the engine oil
1)
■ ■
Replace the engine oil filter
■ ■
Clean/replace the spark plugs
■ ■
Check the caster wheels (every 200 hours)
●
Check/adjust the mower deck
● ●
Check the engine valve clearance
4)
♦ ♦
Perform the 300-hour service
4)
♦ ♦
Lubricate according to Lubrication Schedule
3, 4)
● ● ● ● ●
●
=
Described in this manual
♦
=
Not described in this manual
■
=
See engine manufacturers’ Owners Manual
1)
First change after 5-8 hours. When operating with a heavy load or
at high ambient temperatures, replace every 50 hours.
2)
In dusty conditions, cleaning and replacement are required more
often.
3)
For daily use, the machine should be lubricated twice weekly.
4) Performed by authorized service workshop.
WARNING! Before
performing any service or
adjustment checklist
•
Engage the park brake.
• Place the Blade-switch in the
disengaged position.
• Turn the ignition switch to OFF
position and remove the key.
• Make sure the blades and all
moving parts have completely
stopped.
20
MAINTENANCE