Husqvarna R 316TX, Operator'S Manual

Page: 31 / 164

Problem Cause
The engine apparently has no
power
The air filter is clogged. See
To clean and change the air filter on page 23
.
The spark plug is defective.
There is dirt in the carburetor or fuel line.
The throttle cable is incorrectly adjusted.
The transmission does not have
sufficient power
The transmission cold air intake or the cooling fins are blocked.
The fan on the transmission is damaged.
There is no oil in the transmission or the oil level is too low. See
To do a check
of the transmission oil level on page 29
.
The battery does not charge The battery is defective. See
Battery safety on page 12
.
The connection at the cable connectors on the battery terminals is bad. See Bat-
tery safety on page 12 .
There is vibration in the product The blades are loose. See To examine the blades on page 27 .
One or more of the blades are unbalanced. See
To examine the blades on page
27
.
The engine is loose.
The cutting result is unsatisfacto-
ry
The blades are blunt. See
To examine the blades on page 27
.
The grass is long or wet. See To get a good cutting result on page 18 .
The cutting deck is skew.
There is grass blockage in the cutting deck. See
To clean the product on page
21
.
The tire pressure is different on the right and left sides. See
Tire pressure on
page 25
.
The product is operated at a too high speed. See
To get a good cutting result on
page 18
.
The engine speed is too low. See To get a good cutting result on page 18 .
The drive belt slips.
Display - Troubleshooting
Symbol Name
Indication on the dis-
play
Sound Cause
Slope indicator
The symbol shows. -
You operate the product in a
slope >10°. Refer to
Safety in-
structions for operation on page
9
.
The symbol flashes. -
You operate the product in a
slope >15°. Refer to
Safety in-
structions for operation on page
9
.
Oil pressure sensor The symbol shows.
1 long
sound.
Low oil pressure. Refer to
To do
a check of the engine oil level on
page 28
.
844 - 007 - 03.11.2021 31