Husqvarna LG 400 Operator'S Manual Download Page 2

Page: 2 / 28

Contents

Introduction..................................................................... 2

Safety..............................................................................6

Operation...................................................................... 10

Maintenance................................................................. 13

Transportation, storage and disposal........................... 20

Technical data.............................................................. 22

EC Declaration of Conformity....................................... 25

Introduction

California Proposition 65

WARNING

The engine exhaust from this product

contains chemicals known to the State of

California to cause cancer, birth defects

or other reproductive harm.

Product description

The product is a walk-behind reversible plate compactor

for compaction of granular soils in moderately thick

layers to layers of larger depth.

Intended use

The product is for professional operation only. Use the

product for repairs and maintenance of driveways, paths

and parking lots. With the optional block paving kit the

product can also be used for block paving. Do not use

the product for other tasks.

1224 - 002 - 06.04.2020

Summary of Contents for LG 400





























Search results

Summary of Contents for LG 400

Reviews:

Related manuals for LG 400

Brands by name

Popular brands

Husqvarna LG 400, Operator'S Manual

Search results

Summary of Contents for LG 400

Reviews:

Related manuals for LG 400

Brands by name

Popular brands