Problem
Cause
Possible solutions
The blade guard extender and the
dust shield do not move freely.
The blade guard extender and the
dust shield do not move back when
the product is removed from the work
piece.
The moving parts of the blade guard
extender and the dust shield are
clogged.
Clean the moving parts.
The springs of the blade guard exten-
der and the dust shield do not opera-
te correctly.
Do a check of the springs. Clean the
springs.
The fan does not operate.
The fan is blocked by foreign object.
Remove the fan lid and remove the
foreign object that blocks the fan.
The bearings are defective.
Do a check of the bearings.
The fan belt does not have the cor-
rect tension.
Do a check of the fan belt.
Transportation, storage and disposal
Transportation and storage
• Safely attach the product during transportation to
prevent damage and accidents.
• Remove the cutting blade before transportation of
the product.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Keep the cutting blades in dry, frost free conditions.
• Examine new blades for storage damage.
• Remove the fuel from the fuel tank before long-term
storage.
• Get support from your local fuel vendor for
information where to discard the used fuel.
Disposal
• Obey the local recycling requirements and applicable
regulations.
• Discard all chemicals, such as engine oil or fuel, at a
service center or at an applicable disposal location.
• When the product is no longer in use, send it to a
Husqvarna dealer or discard it at a recycling
location.
861 - 004 - 27.02.2019
135
Summary of Contents for K 770 Dry Cut
Page 139: ...861 004 27 02 2019 139 ...
