• Push the machine stop button on the power pack.
Refer to the operator's manual for the power pack.
Lamp indicators in the product
Indication
Cause
Step
1 green lamp flashes. The product is connected to a power pack and is pre-
pared for operation.
The power output is less than 70% of the maximum
available output in operation.
N/A
2 green lamps flash.
The power output is 70-90 % of the maximum available
output in operation.
N/A
3 green lamps flash.
The cutting speed is at its best performance.
The power output is 90 % of the maximum available out-
put in operation.
N/A
3 green and 1 yellow
lamps flash.
The power output drops.
Decrease the load.
3 green, 1 yellow and
1 red lamps flash.
The product is too hot.
Decrease the load or increase
the water flow or airflow to de-
crease the temperature.
All the status indica-
tion lamps flash.
The product is too hot.
Decrease the load or increase
the water flow or airflow to de-
crease the temperature.
The power is decreased.
Increase the water flow or airflow
to decrease the temperature.
The system is in automatic shutdown.
Put the power pack in a location
with lower temperature.
Refer to the operator's manual
for the power pack for more in-
structions.
Maintenance
Introduction
WARNING: Read and understand the safety
chapter before you do maintenance on the
product.
For all servicing and repair work on the product, special
training is necessary. We guarantee that professional
repairs and servicing is available. If your dealer is not a
service agent, speak to them for information about the
nearest service agent.
For spare parts, speak to your Husqvarna dealer or
service agent.
20
1461 - 001 - 17.02.2020
Summary of Contents for K 7000 Ring
Page 123: ...1461 001 17 02 2020 123 ...
