11 SERVICE WORK ON THE CHASSIS
59
F00057-10
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
.
–
Remove cover
with membrane
.
F00083-10
–
Fill bleeding syringe
with the appropriate hydraulic fluid.
Bleed syringe (50329050000)
Brake fluid DOT 4 (
–
Mount bleeding syringe
on bleeder screw
using a fitting section of hose.
–
Only loosen bleeder screw
on the clutch slave cylinder to the point where fill-
ing is possible.
Info
Clean up overflowed or spilled brake fluid immediately with water.
Avoid contact between brake fluid and painted parts. Brake fluid attacks
paint.
Only use clean brake fluid from a sealed container.
F00058-10
–
Inject the liquid into the system only until it emerges from drill hole
of the
master cylinder without bubbles.
–
Now and then, extract fluid from the master cylinder reservoir to prevent overflow.
–
Tighten the bleeder screw and remove the bleeding syringe with the hose.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container rim
4 mm (0.16 in)
–
Position the cover with the membrane. Mount and tighten the screws.
Summary of Contents for FC 250 2017
Page 1: ...OWNER S MANUAL 2017 FC 250 Art no 3402095en ...
Page 2: ......