9
SERVICE SCHEDULE
26
Every 30 operating hours
Every 20 operating hours
Every 10 operating hours/after every race
Once after 1 operating hour
Check the fuel pressure.
●
●
●
Check idle.
○
●
●
●
Final check: Check the vehicle for safe operation and take a test ride.
○
●
●
●
Read out the fault memory after the test ride using the Husqvarna Motorcycles diagnostics tool.
○
●
●
●
Make the service entry in the
Husqvarna Motorcycles Dealer.net
and in the Service and Warranty Book-
let.
○
●
●
●
○
One-time interval
●
Periodic interval
9.3
Recommended work
Annually
Every 100 operating hours
Every 50 operating hours
Every 40 operating hours
Once after 20 operating hours
Once after 10 operating hours
Change the front brake fluid.
●
Change the rear brake fluid.
●
Change the hydraulic clutch fluid.
●
Grease the steering head bearing.
●
Service the fork.
○
●
Service the shock absorber.
○
●
Change the fuel filter.
●
Perform minor engine service including removing and installing the engine. (Change the spark
plug and spark plug connector. Change the piston, check and measure the cylinder; check the
cylinder head. Check the camshaft and cam lever. Check the timing assembly. Change the intake
flange.)
●
●
Perform major engine service including removing and installing engine. (Change valves, valve
springs, valve spring seats, and valve spring retainers. Change the connecting rod, conrod bear-
ing, and crank pin. Check the transmission and shift mechanism. Check the oil pressure regulator
valve. Change the suction pump. Check the force pump and lubrication system. Change the tim-
ing chain. Change all engine bearings. Change the freewheel.)
●
○
One-time interval
●
Periodic interval
Summary of Contents for FC 250 2017
Page 1: ...OWNER S MANUAL 2017 FC 250 Art no 3402095en ...
Page 2: ......
