Husqvarna F2401V5, Owner'S Manual

Page: 68 / 152

11 SERVICE WORK ON THE CHASSIS
66
11.27 Removing the main silencer
Warning
Danger of burns
The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
V01585-10
–
Remove screws
1
with the washers.
–
Pull off the main silencer from the manifold at exhaust
sleeve
2
.
11.28 Installing the main silencer
V01586-10
–
Position the main silencer in exhaust sleeve
1
.
–
Mount and tighten screws
2
with the washers.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
11.29 Changing the glass fiber yarn filling of the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the rock wool escape into the air, and the main silencer “burns out”.
Not only is the noise level higher, but the performance characteristics change.
Preparatory work
–
Remove main silencer. ( p. 66)