12 BRAKE SYSTEM
108
H02369-10
–
Check that spring plate
4
in the brake caliper and slid-
ing plate
6
in the brake caliper bracket are seated cor-
rectly.
H02370-10
–
Insert the new brake linings.
–
Mount pin
5
.
Spring plate
4
engages in the groove on the pin.
Info
Always change the brake linings in pairs.
Make sure that decoupling plate
7
is mounted
on the piston side brake lining.
–
Mount cotter pins
3
.
–
Operate the foot brake lever repeatedly until the brake
linings are in contact with the brake disc and there is a
pressure point.
V01357-10
–
Add brake fluid to level
A
.
Brake fluid DOT 4 / DOT 5.1 (
–
Mount and tighten screw cap
1
with membrane
2
and
the shim.
Info
Use water to immediately clean up any brake fluid
that has overflowed or spilled.
–
Mount the cable ties.
