Husqvarna F2301V6, Owner'S Manual

Page: 80 / 157

11 SERVICE WORK ON THE CHASSIS
78
11.38 Checking the chain, rear sprocket, engine sprocket, and chain guide
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 51)
400227-01
Main work
–
Shift the transmission to the neutral position.
–
Check the chain, rear sprocket and engine sprocket for wear.
» If the chain, rear sprocket or engine sprocket is worn:
–
Change the drivetrain kit.
Info
The engine sprocket, rear sprocket and chain
should always be replaced together.
400987-10
–
Pull on the top section of the chain with the specified
weight
A
.
Guideline
Weight, chain wear mea-
surement 10 … 15 kg (22 … 33 lb.)
–
Measure distance
B
of 18 chain rollers in the lower chain
section.
Info
Chain wear is not always even, so you should repeat
this measurement at different chain positions.
Maximum distance
B
from
18 chain rollers at the
longest chain section
272 mm (10.71 in)
» If distance B
is greater than the specified measurement:
–
Change the drivetrain kit.
Info
When a new chain is mounted, the rear
sprocket and engine sprocket should also be
changed.
New chains wear out faster on an old, worn
rear sprocket or engine sprocket.