Husqvarna F2201U1, Owner'S Manual

Page: 121 / 163

TUNING THE ENGINE 16
119
16.1 Checking throttle cable play
400192-11
–
Check the throttle grip for smooth operation.
–
Move the handlebar to the straight-ahead position. Turn the
throttle grip back and forth slightly and determine the play in
throttle cable
A
.
Throttle cable play 3 … 5 mm (0.12 … 0.2 in)
» If the throttle cable play does not meet specifications:
–
Adjust throttle cable play. ( p. 119)
–
Push the cold start button in all the way.
When the throttle grip is turned forward, the cold start but-
ton returns to its original position.
» If the cold start button does not return to its original posi-
tion:
–
Adjust throttle cable play. ( p. 119)
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and let it run at idle speed. Move the handle-
bar to and fro over the entire steering range.
The idle speed must not change.
» If the idle speed changes:
–
Adjust throttle cable play. ( p. 119)
16.2 Adjusting throttle cable play
Info
If the correct routing of the throttle cables has already been secured, the fuel tank does not need to be
removed.
Preparatory work
–
Remove the air filter box cover. ( p. 66)
–
Remove the seat. ( p. 65)
–
Remove the right side cover. ( p. 70)
–
Remove the fuel tank. ( p. 71)
–
Check throttle cable routing. ( p. 81)