18 ENGINE
18.5.32 Installing the spacer
18.5.33 Installing the clutch push rod
230
-
Mount and tighten the oil drain plug
(i}
with the magnet and
the new seal ring.
Guideline
Oil drain plug with
magnet
M12x1.5
20 Nm (14.8 lbf ft)
-
Push the oil screen with O-rings onto a pin wrench.
-
Push the pin wrench through the opening into the drill hole of
the opposite engine case wall and push the oil screen as far
as possible into the engine case.
-
Mount and tighten screw plug
(D
with the O-ring.
Guideline
Screw plug, oil
screen
M20x1.5
15 Nm (11 .1 lbf ft)
Grease the shaft seal ring before mounting.
-
Position the O-ring. Mount spacer
O
with the bevel facing
inward.
Mount clutch push rod
0-
