Husqvarna F2101V1, Owner'S Manual

Page: 73 / 151

SERVICE WORK ON THE CHASSIS 11
71
Main work
–
Check the throttle cable routing. ( p. 77)
K01087-11
–
Position the fuel tank and fit the two spoilers laterally to the
radiator.
–
Make sure that no cables or throttle cables are trapped or
damaged.
K01086-11
–
Attach the fuel tank breather hose to the fuel tank lid.
–
Mount and tighten screw
1
with the rubber bushing.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
K01085-11
–
Mount and tighten screws
2
.
Guideline
Screw, fuel tank
spoiler on radiator M6 6 Nm (4.4 lbf ft)
V01379-11
–
Plug in connector
3
for the fuel pump.
–
Remove the wash cap set and thoroughly clean the quick
release coupling using compressed air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
Silicone spray ( p. 141)
–
Join the quick-release coupling
4
of the fuel line.
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
Finishing work
–
Install the right side cover. ( p. 68)
–
Mount the seat. ( p. 63)
–
Install the air filter box cover. ( p. 64)