Husqvarna EE 5 2022, Owner'S Manual

Page: 48 / 157

13 SERVICE WORK ON THE CHASSIS
46
13.4 Cleaning the dust boots of the fork legs
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 45)
–
Remove the fork protector. ( p. 46)
M01662-10
Main work
–
Push dust boots
1
of both fork legs downward.
Info
The dust boots remove dust and coarse dirt parti-
cles from the inside fork tubes. Over time, dirt can
accumulate behind the dust boots. If this dirt is not
removed, the seals rings behind can start to leak.
Warning
Danger of accidents
Oil or grease on the brake
discs reduces the braking effect.
–
Always keep the brake discs free of oil and
grease.
–
Clean the brake discs with brake cleaner when
necessary.
–
Clean and oil the dust boots and inside fork tubes of both
fork legs.
Universal oil spray ( p. 99)
–
Press the dust boots back into the installation position.
–
Remove the excess oil.
Finishing work
–
Install the fork protector. ( p. 47)
–
Remove the motorcycle from the lift stand. ( p. 45)
13.5 Removing the fork protector
M01710-10
–
Remove screws
1
and take off the clamp.
–
Remove screws
2
on the left and right rear fork leg. Take
off the fork protector.