Husqvarna EE 5 2022 Owner'S Manual Download

Page: 62 / 157

13 SERVICE WORK ON THE CHASSIS

M01693-01

–

Check that the chain guide is firmly seated.
» If the chain guide is loose:

–

Tighten the screws on the chain guide.
Guideline

Remaining
screws, chassis

10 Nm (7.4 lbf ft)

Finishing work

–

Remove the motorcycle from the lift stand. (

p. 45)

13.27

Adjusting the chain guide

Info

The size of the chain wheel varies with the number of teeth. The chain guide can be adjusted on small
sprockets.

M01693-10

–

Remove screw

–

Position the chain guide.

–

Mount and tighten the screw.
Guideline

Remaining screws,
chassis

10 Nm (7.4 lbf ft)

13.28

Checking the frame

M01652-01

–

Check the frame for damage, cracks, and deformation.
» If the frame shows signs of damage, cracks, or deforma-

tion:

–

Change the frame.
Guideline

Repairs on the frame are not permitted.

Summary of Contents for EE 5 2022






























































































































































Search results

Summary of Contents for EE 5 2022

Reviews:

Related manuals for EE 5 2022

Brands by name

Popular brands

Husqvarna EE 5 2022, Owner'S Manual

Search results

Summary of Contents for EE 5 2022

Reviews:

Related manuals for EE 5 2022

Brands by name

Popular brands