Husqvarna EE 5 2022 Owner'S Manual Download Page 27

Page: 27 / 157

RIDING INSTRUCTIONS 9

M01658-10

Optional:

–

Press ride mode button

to change the ride mode.

H03603-01

–

Select one of the ride modes (

p. 20).

–

Close the throttle grip beyond the basic position.

The vehicle emits a beep, is ready to ride, and reacts to
the throttle grip.

9.3

Starting off

Info

The plug-in stand must be removed before riding.

–

Open the throttle carefully.

9.4

Applying the brakes

Warning

Danger of accidents

Excessively forceful application of the brakes blocks the wheels.

–

Explain to your child that he or she must adapt the braking to the traffic situation and the road con-
ditions.

Warning

Danger of accidents

A spongy pressure point on the front or rear brake reduces braking efficiency.

–

Check the brake system and do not allow your child to continue riding until the problem is elimi-
nated. (Your authorized Husqvarna Motorcycles workshop will be glad to help.)

Summary of Contents for EE 5 2022






























































































































































Search results

Summary of Contents for EE 5 2022

Reviews:

Related manuals for EE 5 2022

Brands by name

Popular brands

Husqvarna EE 5 2022, Owner'S Manual

Search results

Summary of Contents for EE 5 2022

Reviews:

Related manuals for EE 5 2022

Brands by name

Popular brands