Husqvarna DXR 145, Operator'S Manual, Page: 104 / 120

2. Attach the lifting equipment at the lifting eyes on the
product.
To lift the product (DXR 275, DXR 305,
DXR 315)
WARNING:
The lifting equipment must
have the correct specification to lift the
product safely. The rating plate on the
product shows the product weight. Refer to
Rating plate on page 18
.
WARNING:
Do not walk or stay below
or near a lifted product. Keep bystanders
away from the work area. Refer to Work
area safety on page 20
.
WARNING:
Do not lift a damaged
product. Make sure that the lifting eyes are
correctly installed and not damaged.
1. Retract the arm system before you lift the product.
2. Attach the lifting equipment at the lifting eyes on the
product.
To attach the product to a
transportation vehicle
Attach the product during transportation to prevent
accidents and damage to the equipment. Use tie-down
straps to attach the product to the transportation vehicle.
Use different tie-down straps for the tools and other
equipment.
1. Put the product against the front edge of the
transportation vehicle.
2. Start the product. Refer to
To start the product (DXR
145) on page 52 and To start the product (DXR 275,
DXR 305, DXR 315) on page 53
.
3. Move the arm system until it is against the floor of
the transportation vehicle.
4. Extend the outriggers. Refer to
To operate the
outriggers on page 61 . The product must stay on the
floor of the transportation vehicle.
5. Stop the product. Refer to
To stop the product (DXR
145) on page 62 and To stop the product (DXR 275,
DXR 305, DXR 315) on page 62
.
104 1401 - 002 - 15.10.2021