background image

2

SAFETY RULES

Safe Operation Practices for Ride-On Mowers

DANGER:  THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS.  FAILURE 

TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

•  Follow the manufacturer's recommendation for wheel 

weights or counterweights.

• 

Keep machine free of grass, leaves or other debris build-up 

which can touch hot exhaust / engine parts and burn. Do 

not allow the mower deck to plow leaves or other debris 

which can cause build-up to occur. Clean any oil or fuel 

spillage before operating or storing the machine. Allow 

machine to cool before storage.

II. SLOPE OPERATION

Slopes are a major factor related to loss of control and tip-

over accidents, which can result in severe injury or death.  

Operation on all slopes requires extra caution.  If you cannot 

back up the slope or if you feel uneasy on it, do not mow it.
• 

Mow up and down slopes, not across.

• 

Watch for holes, ruts, bumps, rocks, or other hidden ob-

jects.  Uneven terrain could overturn the machine.  Tall 

grass can hide obstacles.

• 

Choose a low ground speed so that you will not have to 

stop or shift while on the slope.

• 

Do not mow on wet grass. Tires may lose traction.

 

Always keep the machine in gear when going down slopes. 

Do not shift to neutral and coast downhill.

• 

Avoid starting, stopping, or turning on a slope.  If the tires 

lose traction, disengage the blades and proceed slowly 

straight down the slope.

• 

Keep all movement on the slopes slow and gradual.  Do 

not make sudden changes in speed or direction, which 

could cause the machine to roll over.

• 

Use extra care while operating machine with grass catch-

ers or other at tach ments; they can affect the stability of 

the machine. Do no use on steep slopes.

• 

Do not  try to stabilize the machine by putting your foot 

on the ground.

•  Do not mow near drop-offs, ditches, or embankments.  

The machine could suddenly roll over if a wheel is over 

the edge or if the edge caves in.

I. GENERAL OPERATION 

• 

Read, understand, and follow all instructions on the ma-

chine and in the manual before starting.

• 

Do not put hands or feet near rotating parts or under the 

machine. Keep clear of the discharge opening at all times.

• 

Only allow responsible adults, who are familiar with the 

in struc tions, to operate the machine.

• 

Clear the area of objects such as  rocks, toys, wire, etc.,  

which could be picked up and thrown by the blades.

• 

Ensure the area is clear of bystanders before operating.  

Stop machine if anyone enters the area.

• 

Never carry passengers.

•  Do not mow in reverse unless absolutely necessary.  

Always look down and behind before and while back ing.

• 

Never direct discharged material toward anyone. Avoid 

discharging material against a wall or obstruction. Material 

may ricochet back toward the operator. Stop the blades 

when crossing gravel surfaces.

• 

Do not operate machine without the entire grass catcher, dis-

charge chute, or other safety devices in place and working.

• 

Slow down before turning.

• 

Never leave a running machine unattended.  Always turn 

off blades, set parking brake, stop engine, and remove 

keys before dismounting.

•  Disengage blades when not mowing. Shut off engine 

and wait for all parts to come to a complete stop before 

cleaning the machine, removing the grass catcher, or 

unclogging the discharge chute.

• 

Operate machine only in daylight or good artificial light.

• 

Do not operate the machine while under the influence of 

alcohol or drugs.

• 

Watch for traffic when operating near or crossing road ways.

• 

Use extra care when loading or unloading the machine 

into a trailer or truck.

• 

Always wear eye protection when operating machine.

• 

Data indicates that operators, age 60 years and above, 

are involved in a large percentage of riding mower-related 

injuries.  These operators should evaluate their ability to 

operate the riding mower safely enough to protect them-

 selves and others from serious injury.

WARNING: In order to prevent ac ci den tal 

starting when setting up, trans port ing, 

ad just ing or making repairs, al ways dis con-

 nect spark plug wire and place wire where 

it can not contact spark plug.

WARNING: Do not coast down a hill in neut-

ral, you may lose control of the tractor.

WARNING: Tow only the attachments that 

are rec om mend ed by and comply with 

spec i fi ca tions of the man u fac tur er of your 

tractor. Use common sense when towing. 

Operate only at the low est possible speed 

when on a slope.  Too heavy of a load, while 

on a slope, is dan ger ous.  Tires can lose 

trac tion with the ground and cause you to 

lose control of your tractor.

Summary of Contents for CTH19530





































Reviews: