Husqvarna Chain Saw Operator'S Safety & Operating Instruction Manual Download Page 6 | Manualshive

Page: 6 / 42

Husqvarna Chain Saw Operator'S Safety & Operating Instruction Manual Download Page 6

INTRODUCTION

6

Personal Equipment

Your Condition

Never operate a chain saw when you are tired, angry,
emotionally disturbed, or under the influence of alcohol,
drugs, medication, or anything that could affect your
vision, alertness, coordination or judgment. Cutting wood
can be strenuous - check with your doctor before
undertaking this kind of work.

Clothing

Wear proper clothing and equipment intended to protect
you from potential hazards such as lacerations, thrown
objects, and hearing loss.

IMPORTANT

The personal safety equipment cannot prevent an
accident but use of good personal protective
equipment may minimize an injury in the event of an
accident.
Ask your dealer to show you the latest safe forestry
equipment available to help protect you. A complete
helmet with visor and earmuffs and protective pants
or chaps, are examples.

Wear clothing that keeps you warm and comfortable,
and, therefore, safer in adverse weather.

Never wear loose fitting clothing, jewelry, etc., which
could become entangled in the saw and cause serious
injury.

Manuals

Your chain saw comes with two instruction manuals.
This Safety Manual contains general information in how
to operate your chain saw in a safe way.

The Operator's Manual gives specific information on
the technical design and maintenance regarding your
particular model.

Read both manuals very carefully before operating a
chain saw.

We continously strive to improve all of our products. As a
result, engineering changes and improvements are
made from time to time. Written notices relating to such
changes are sent to our dealers. Make a point of asking
your chain saw dealer to show you the latest design.

WARNING

Under no conditions should the chain saw be
modified from its original design without permission
of the manufacturer. Nonauthorized accessories
should never be used. Nonauthorized modification
and/or accessories can cause serious injury or death
to the operator or others.

#

For Husqvarna Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

«
...
4
5
6
7
8
...
»

Summary of Contents for Chain Saw











































Reviews:

No comments