manualshive.com logo in svg

Husqvarna Chain Saw, Operator'S Safety & Operating Instruction Manual, Page: 11 / 42

Share
Download
Husqvarna Chain Saw Operator'S Safety & Operating Instruction Manual Download Page 11

CHAIN SAW SAFETY FEATURES

11

MUFFLER

SPARK ARRESTOR
SCREEN

Muffler

Designed to decrease noise level and direct exhaust
gases away from the operator. During operation the
muffler is hot. Do not touch.

Spark Arrestor

The exhaust gases are hot, and can contain sparks
which may cause fire if directed against dry and
combustible material. To minimize the risk for forest fires
your chain saw is equipped with a spark arresting screen
that will prevent sparks (glowing carbon particles) of a
certain size to leave the muffler. Over a period of time
the particles will clog up the screen. If the screen is not
cleaned, the particles will restrict the exhaust and your
chain saw will lose power. Follow the instructions in the
Operator's Manual when removing and cleaning the
screen. We recommend that you always have the spark
arrestor screen installed. Help prevent forest fires.
In certain states the spark arrestor is mandatory.
Never use your chain saw without a spark arrestor
screen if required in your area.

!

 CAUTION

Never use a saw without a muffler, or with a
damaged muffler. A damaged muffler may
substantially increase the noise level and the fire
hazard. Keep fire fighting equipment handy. If a
spark arrestor screen is required in your area, never
use the saw without or with a broken spark arrestor
screen.

Vibration Isolator

Located between the engine unit and the handle unit.
Reduces operator’s exposure to vibration.

IMPORTANT

The isolators should be checked for cracks and
deformation. Ask your dealer to perform this function
twice a year or when you suspect an element has
been damaged.

Heated Handles

Saw models with heated handles are available and will
keep your hands warm during cold days.

For Husqvarna Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

Summary of Contents for Chain Saw











































Reviews:

No comments