Contents
Introduction..................................................................... 2
Safety..............................................................................4
Installation.......................................................................5
Operation........................................................................ 5
Maintenance................................................................... 6
Troubleshooting.............................................................. 6
Technical data................................................................ 7
EC Declaration of Conformity......................................... 8
Introduction
Product description
When the dust extractor is started, dust laden air is
sucked through the inlet valve at high speed through the
suction hose. The air is slowed down by the cyclone and
large dust particles are separated. Fine dust particles
continue to through the hose to the dust extractor. The
separated dust accumulates in the cyclone. When the
dust extractor is switched off, the dust falls through the
bottom flap into the plastic dust bag.
The separated dust accumulates in the cyclone. When
the dust extractor is switched off, the dust falls through
the bottom flap into the plastic dust bag.
Intended use
The pre-separator C 3000 / C 5500 is intended for
commercial use.
The product is intended for pre-separating dry, non-
combustible dust.
2
819 - 002 - 23.11.2018
Summary of Contents for C 3000
Page 30: ...30 819 002 23 11 2018 ...
Page 31: ...819 002 23 11 2018 31 ...
