5.3 Replacement of the blades
WARNING:
Husqvarna can only
guarantee safety if you use Husqvarna
original blades with the embossed crowned
H-mark logotype.
WARNING:
You must replace the
screws when you replace the blades. The
used screws can wear quickly and make the
blade come loose, this can cause serious
injury.
Replace worn or damaged blades for a safe operation.
Replace the blades regularly for a satisfactory cut result
and a low energy use. All 3 blades and screws must be
replaced at the same time to get a balanced cutting
system.
5.3.1 To replace the blades
1.
Push the STOP button
2.
Set the Main switch to position
0
.
3.
Turn the product upside down. Put the product on
a soft and clean surface to avoid scratching the
product.
4.
Rotate the skid plate so that its holes align with the
screws for the blade.
5.
Remove the 3 screws with a screwdriver.
6.
Remove the 3 blades.
7.
Attach 3 new blades and screws.
8.
Make sure that the blades can pivot freely.
5.4 Replace the wheel brushes
The wheel brushes on the product removes grass from
the wheels of the product. Examine the wheel brushes
regularly and replace them when they are worn.
Husqvarna recommends to replace the wheel brushes
each 5-10 weeks.
5.5 Battery
CAUTION:
Charge the battery fully
before you put the product into storage. If
the battery is not fully charged it can cause
damage to the battery.
If the operating time of the product is shorter than usual
between charges, this means that the battery is at the
end of its life cycle. Replace the battery to extend the
operating time.
Note:
The battery life is related to the length of the
season and how many hours a day the product
operates. A long season or many hours of operation a
day means that the battery must be replaced more
regularly.
5.6 Winter service
Take your product to your Husqvarna central service for
service prior to winter storage. Regular winter service
will maintain the product in good condition and create
the best conditions for a new season without any
disruptions.
Service usually includes the following:
•
Thorough cleaning of the body, the chassis, the
blade disc and all other moving parts.
26 - Maintenance
1576 - 004 - 16.11.2021