Husqvarna AUTOMOWER 550 EPOS Operator'S Manual Download Page 2

Page: 2 / 48

Contents

Connect app............6

1.9 General manual instructions................................. 7

2 Safety

2.1 Safety information................................................. 8
2.2 Safety definitions...................................................9
2.3 Safety instructions for operation............................9

3 Installation

4 Operation

4.1 Main switch......................................................... 23
4.2 To start the product............................................. 23
4.3 To select operation mode Start........................... 23
4.4 Operating mode - Park........................................23
4.5 To stop the product............................................. 24
4.6 To switch off the product..................................... 24
4.7 To charge the battery.......................................... 24

5 Maintenance

5.1 Introduction - maintenance..................................25
5.2 Clean the product................................................25
5.3 Replacement of the blades................................. 26
5.4 Replace the wheel brushes.................................26
5.5 Battery.................................................................26
5.6 Winter service..................................................... 26

6 Troubleshooting

6.1 Introduction - troubleshooting..............................28
6.2 Fault messages...................................................28

6.3 Information and warning messages.................... 34
6.4 LED indicator lamp on the charging station........ 34
6.5 LED indicator on the product...............................35
6.6 Symptoms........................................................... 36

7 Transportation, storage and disposal

7.1 Transportation..................................................... 38
7.2 Storage................................................................38
7.3 Disposal.............................................................. 38

8 Technical data

8.1 Technical data.....................................................39
8.2 Registered trademarks........................................41

9 Warranty

9.1 Warranty terms....................................................42

10 EU Declaration of Conformity
11 UK Declaration of Conformity

1576 - 004 - 16.11.2021

Summary of Contents for AUTOMOWER 550 EPOS
















































Search results

Summary of Contents for AUTOMOWER 550 EPOS

Reviews:

Husqvarna AUTOMOWER 550 EPOS, Operator'S Manual, Page: 2 / 48

Search results

Summary of Contents for AUTOMOWER 550 EPOS

Reviews: