7
ASSEMBLY
1
INSTALL GUARD AND HANGER
Remove rear guard from mower by removing the
1.
two bolts on either side of the frame.
Hanger
Bracket
Using four round head
2.
5
/
16
-18 x ¾ bolts and nuts,
attach hanger bracket to collection guard.
Collection
Guard
Rear Guard
Secure collection guard assembly to the mower
3.
frame at the side where rear guard was removed.
Use two
3
/
8
-16 x ¾ round head bolts and nuts on
each side.
With the collection guard as a template and using
4.
a drill with a
5
/
16
" bit, add a hole on each side of
the frame's upper edge.
Bolt collection guard assembly to upper edge with
one
5
/
16
-18 x ¾ hex head bolt and nut on each
side.
Drill location
2
INSTALL MUFFLER EXTENSION
Muffler
extension
Bolt muffler extension to the engine with four #10
1.
hex washer head screws.
