Husqvarna 580BFS Mark II Operator'S Manual Download Page 5

• All servicing and repair work on the product requires

special training. This is especially true of the safety

equipment. Never use a product with faulty safety

equipment. If your product fails any of the checks

described in this operator's manual you must contact

your service agent. The safety equipment of the

product must be maintained as described in this

operator's manual. When you buy any of our

products we guarantee the availability of

professional repairs and service. If the retailer who

sells your product is not a servicing dealer, ask him

for the address of your nearest service agent.

Safety instructions for operation

WARNING: Read the warning instructions

that follow before you use the product.

• This product is a dangerous tool if used carelessly or

incorrectly and can cause serious, even fatal injuries.

It is extremely important that you read and

understand the contents of this operator’s manual.

• Long-term exposure to noise can result in permanent

hearing impairment. Always use approved hearing

protection.

• Do an overall inspection of the machine before use,

Refer to 

Maintenance schedule on page 13

 .

• Never use the machine if you are tired, if you have

drunk alcohol, or if you are taking medication that

could affect your vision, your judgement or your

coordination.

• Wear personal protective equipment. Refer to 

Personal protective equipment on page 6

.

• All covers and guards must be fitted before starting.

Ensure that the spark plug cap and ignition lead are

undamaged to avoid the risk of electric shock.

• The blower operator must make sure that no

bystanders or animals come nearer than 15 m.

Whenever several operators are working in the same

work area, they should maintain a safe distance of at

least 15 m from one another.

• Never allow children to operate the machine. Never

allow anyone else to use the machine without first

ensuring that they have read and understood the

contents of the operator’s manual.

• Always check for any objects that may block the air

intake screen before beginning work.

• Never remove the air intake screen.
• In case of emergency, release yourself from the

machine by opening the waist and chest belt and let

the machine fall backwards.

• Always contact local authorities and make sure you

are following applicable directives.

• Keep all parts of your body away from hot surfaces.
• Never start the machine indoors. Exhaust fumes can

be dangerous if inhaled.

• Observe and be aware of the surroundings. Ensure

that no people or animals can come into contact with

the product. If anyone approaches your work area,

set the throttle control to the lowest throttle until the

person is at a safe distance. Direct the product away

from people, animals, play areas, open windows and

cars etc. No unauthorised persons or animals may

be present in the working area, which is 15 metres.

• Overexposure to vibration can lead to circulatory

damage or nerve damage in people who have

impaired circulation. Contact your doctor if you

experience symptoms of overexposure to vibration.

Such symptoms include numbness, loss of feeling,

tingling, pricking, pain, loss of strength, changes in

skin colour or condition. These symptoms normally

appear in the fingers, hands or wrists. The risk

increases at low temperatures.

• Engine exhaust fumes contain carbon monoxide,

which can cause carbon monoxide poisoning. For

this reason you should not start or run the product

indoors, or anywhere that is poorly ventilated. The

exhaust fumes from the engine are hot and may

contain sparks which can start a fire. Never start the

product indoors or near combustible material.

• Allow the engine to cool before refueling.
• The powerful currents of air can move objects at

such a speed that they can bounce back and cause

serious eye injuries.

• Do not direct the air jet towards people or animals.
• Do not use the machine in bad weather, such as

dense fog, heavy rain, strong wind, intense cold, etc.

Working in bad weather is tiring and can lead to

dangerous conditions, e.g. slippery surfaces.

• Minimize the time of operation by lightly wetting

dusty areas or using spray equipment.

• Make sure you can move and stand safely. Check

the area around you for possible obstacles (roots,

rocks, branches, ditches, etc.) in case you have to

move suddenly. Take great care when working on

sloping ground.

• Never put the product down with the engine running

unless you have it in clear sight.

• Never operate the product from ladders or high

places (such as roofs), it is prohibited and could

result in severe injury.

• Do not use the product unless you are able to call for

help in the event of an accident.

• Watch out for thrown objects. Always wear eye

protection. Stones, rubbish, etc. can be thrown up

into the eyes causing blindness or serious injury.

Keep unauthorised persons at a distance. Children,

animals, onlookers and helpers should be kept

outside the safety zone of 15 m. Stop the machine

immediately if anyone approaches.

• Do not operate the product if the exhaust gas outlet

on the engine cover is covered by a wall and/or

some other obstacles. The product could get

damaged. Make sure that the distance is 50 cm or

more from the obstacles during operation.

• Always stop the engine before cleaning.

936 - 004 - 

5

Summary of Contents for 580BFS Mark II





























































Reviews: