background image

Watch out for thrown objects.

Stones, rubbish, etc., can be

thrown up into the eyes

causing blindness or serious

injury.

Use a residual-current device

(RCI) for increased security. A

residual-current device is fitted

to protect operators in case an

electrical fault should occur.

This product is renowned for

its low vibration load.

Overexposure to vibration can

lead to circulatory damage or

nerve damage in people who

have impaired circulation.

Contact your doctor if you

experience symptoms of

overexposure to vibration.

Such symptoms include

numbness, loss of feeling,

tingling, pricking, pain, loss of

strength, changes in skin color

or condition. These symptoms

normally appear in the fingers,

hands or wrists.

Only use the product for the

purpose it was intended for.

It is not possible to cover

every conceivable situation

you can face. Always exercise

care and use your common

sense. Avoid all situations

which you consider to be

beyond your capability. If you

still feel uncertain about

operating procedures after

reading these instructions, you

should consult an expert

before continuing.

The harness must always be

worn when working with the

product. Failure to do so

means you will be unable to

manouevre safely and this can

result in injury to yourself

and/or others.

Personal protective

equipment

WARNING: Read the

warning instructions that

follow before you use the

product.

Always use approved personal

protective equipment when

you use the product. Personal

protective equipment cannot

fully prevent injury but it

decreases the degree of injury

if an accident does occur. Let

your dealer help you select the

right equipment.

Long term exposure to noise

can result in damaged

hearing. In general, battery

powered products are

relatively quiet but damage

can result from a combination

of noise level and long usage. 

recommends that operators

use hearing protectors when

790 - 001 - 05.12.2018

9

Summary of Contents for 550iBTX

























Reviews: