The cutting attachment guard prevents injuries from
objects that eject in the direction of the operator. It
also prevents injuries that occur if you touch the cutting
attachment.
1. Do a visual check for damages, for example cracks.
2. Replace the cutting attachment guard if it is
damaged.
To do a check of the vibration damping system
WARNING:
An incorrectly wound cord
or an incorrect cutting attachment increases
the level of vibration. Refer to
instructions for operation on page 5
.
The vibration damping system decreases vibration in
the handles to a minimum which makes the operation
easier.
1. Stop the engine.
2. Do a visual check for deformation and damage.
3. Make sure that the vibration damping units are
correctly attached.
To do a check of the quick-release mechanism
WARNING:
Do not use a harness with
a defective quick-release mechanism.
The quick-release mechanism lets the operator remove
the product quickly from the harness if there is an
emergency.
1. Stop the engine.
2. Do a visual check for damage for example, cracks.
3. Release and attach the quick-release mechanism to
make sure that it operates correctly.
To do a check of the muffler
WARNING:
Do not use a product with
a defective muffler.
WARNING:
The muffler becomes very
hot during and after operation and also at
idle speed. Use protective gloves to prevent
burn injuries.
The muffler keeps noise levels to a minimum and points
exhaust fumes away from the operator.
1. Stop the engine.
8
1069 - 008 - 31.10.2022
Summary of Contents for 535RX
Page 98: ...98 1069 008 31 10 2022 ...
Page 99: ...1069 008 31 10 2022 99 ...
